On-screen keyboard
The on-screen keyboard appears after clicking on a text
entry field with the mouse:
The following screen keyboard appears during mere nu-
merical entry:
The keys have the same function as on a computer key-
board.
To enter the character, left-click the mouse.
To finish data entry, press Enter.
To delete the character in front of the cursor,
click on .
To switch between upper and lower case, click on the
framed a symbol. The current setting is displayed
above the keyboard.
To cancel the entry or exit the field, press ESC.
Starting the device
Important
The device must only be operated with the mains
power specified on the type plate.
For safety reasons, use an uninterruptible power
supply (UPS).
When the device is connected to the power supply, it
starts up automatically.
1.
The device carries out a self-test during the start-up
procedure.
2.
The setup wizard appears. Exit the wizard to access
the live view.
All manuals and user guides at all-guides.com
Switching off, locking and rebooting the de-
vice
Click on "ShutDown" in the main menu. The overview
appears.
1.
2.
3.
Switching on the device
To switch off the device, select ShutDown and con-
firm by pressing Yes. The device is then switched
off.
Do not press any keys during the shutdown pro-
cedure.
Now pull out the plug of the power supply unit.
To lock the system, select the corresponding Lock
symbol on the left. The user interface is now locked
and a password must be entered to access the
menu.
To reboot the device, select the corresponding Re-
boot symbol on the right. The device is then re-
booted.
Plug in the power supply unit to start the device.
78