Velleman CTC1000 Mode D'emploi page 9

2. Use the arrow keys to select the code number you want to set and press OK.
3. Key in a 4 digit code and press OK.
4. Repeat the code and press OK.
5. (optional) Enter a name for the code.
This name will be displayed in the list of pin codes and helps you identify the code.
o
o For information about entering text, see section 17 Entering text.
o If you do not want to use a name, leave this field blank.
6. Press OK.
Notes
In the list of codes:
a pin code with no name will be displayed as ****
•
• a pin code not yet defined will be displayed as ••••
To change a pin code
1. To access the menu item: enter Program mode, go to Gen. Settings, select Pin code and press OK.
2. Use the arrow keys to select the code you want to change and press OK.
3. Press .
4. Refer to topic To set a pin code above.
To delete a pin code
Pin code 1 cannot be deleted. To delete another code:
1. To access the menu item: enter Program mode, go to Gen. Settings, select Pin code and press OK.
V. 04 – 11/02/2016
CTC1000
9 ©Velleman nv