Eschenbach vario FHD Mode D'emploi page 44

Updating the firmware
Select this symbol and then press the
firmware on the device and to update it if necessary. If you have registered your vario
EN
DIGITAL FHD Advanced, you will be notified about any available firmware updates.
To update the firmware please proceed as follows:
1. Connect the vario DIGITAL FHD Advanced to a PC using the provided USB cable.
Ensure that the SD card is inserted in the card slot a.
2. Turn the vario DIGITAL FHD Advanced on. The contents of the SD card will now be
displayed on the PC as the "ESCHENBACH" drive.
3. Now open the web address that was provided to you in the email about the firm-
ware update using the connected PC.
4. Download the firmware update and save it directly on the drive - not in a drive
subfolder.
5. Disconnect the vario DIGITAL FHD Advanced from the PC using the "Unplug and
eject hardware" function, whose symbol you can find on your operating system
taskbar.
6. Open the settings menu, select the
7. Select the
to the previous page, select the
The following icon will be displayed on the screen during the firmware update:
The vario DIGITAL FHD Advanced will turn off automatically once the update is success-
ful. Never turn the device off and never remove the SD card from the device during
the firmware update. Otherwise the vario DIGITAL FHD Advanced could be irreparably
damaged. This type of damage is not covered by the warranty!
You can use the
and return to the main menu.
All manuals and user guides at all-guides.com
symbol and press the
symbol and confirm it with the
button e to display the current version of the
symbol and press the
button. To cancel the update and return
symbol and press the
button e to quit this menu level
- 40 -
button.
button.