Eschenbach vario FHD Mode D'emploi page 40

Adjusting false colors
Select this symbol and then press the
that should be available. Black/white plus inverting are activated by default.
EN
Non-activated combinations are shown crossed out.
Select the required combinations and then change their status using the
Adjusting the reading material brightness
Select this symbol and then press the
material using the following symbols:
- no LED lighting
- the LEDs light up with half power
- the LEDs light up with full power
- turn the LED spots on the screen on or off
Confirm the required brightness using the
Adjusting the screen display brightness
Select this symbol and then press the
using the following symbols:
- display brightness = 25 %
- display brightness = 50 %
- display brightness = 75 %
- display brightness = 100 %
All manuals and user guides at all-guides.com
button e to select the false color combination
button e to set the brightness for the reading
button e.
button e to adjust the display brightness
- 36 -
button e.