Eschenbach vario FHD Mode D'emploi page 35

All manuals and user guides at all-guides.com
Adapting the zoom
To zoom in, press A. To zoom out, press B. The currently se-
lected zoom factor is shown briefly in the display.
EN
Dynamic Line Scrolling
To use Dynamic Line Scrolling, press the OK button F. Then
you can select the desired reading mode using the arrow keys
< and > E (see detailed explanation in the "Dynamic Line
Scrolling (DLS)" chapter on page 28).
Overview function
If you would like to get an overview of the reading materi-
al, press button C. The magnification changes to 1.3 ×. By pressing the button C
again, the previously set magnification is selected again.
False color display
To change false colors, press the D button until the desired false color is displayed.
Channels
A switch for switching over the channels is located on the underside. However, this is
only necessary if two devices are being used next to each other. You can set the relevant
channel in the menu under „Remote control" (see page 37).
- 31 -