Candy PVS 604 R Notice D'emploi Et D'installation page 16

INSTALLATION - BUILT-IN
The cabinet in which your hob will be installed and all adjacent furniture, should be made of
materials which can withstand high temperatures. In addition, all decorative laminates should
be fixed using the heat-resistant glue.
Installation:
• Leave a gap of at least 5 cm between the appliance and the vertical side of the adjacent
furniture.
• A watertight seal is supplied with the hob.
. Before fitting, turn the hob upside down, with the glass surface facing downwards.
NB : make sure that the glass is protected.
. Fit the seal round the hob.
. Make sure it is correctly fitted so as to prevent any leakage into the supporting
cabinet.
Watertight
seal
16
All manuals and user guides at all-guides.com
Hob with glass surface
facing downwards
HOB
Glass
surface of
hob