8
Measurement
8.1
Important tips
•
This monitor automatically switches off 1 minute after the last key operation.
•
To interrupt the measurement, simply press any key. The cuff will deflate
immediately after a key is pressed.
•
Do not measure your blood pressure immediately after consuming a large meal. To
obtain more accurate readings, please wait one hour before measuring.
•
Do not smoke or drink alcohol before measuring your blood pressure.
•
You should not be physically tired or exhausted while taking a measurement.
•
It is important that you relax during measurement. Try to take 15-minutes rest
before a reading.
•
Do not take measurements if you are under stress or under tension.
•
Take your blood pressure at normal body temperature. If you are feeling cold or
hot, wait a while before taking a measurement.
•
If the monitor is stored at very low temperature (near freezing), have it placed at a
warm location for at least one hour before using it.
•
Wait about 5 minutes before taking the next pressure measurement.
•
During the measurement, do not talk or move your arm or hand muscles.
8.2
Procedure
•
Press the START/STOP button
segments will be displayed.
•
Once the actual Memory zone is displayed (U1-3), press the
MEMORY button
•
If no button is pressed within 5 seconds, the measurement will
start automatically.
•
The display will show the last measurement result before
inflating the cuff to the level that is right for you.
•
When the right level is reached, the cuff will deflate.
This monitor will re-inflate automatically to approximately
220mmHg if the system detects that your body needs more
pressure to measure your blood pressure.
•
When the measurement is completed, systolic, diastolic and
pulse will be shown simultaneously on the LCD screen.
•
When a mistake was detected during measurement the Error
icon 'EE' appears on the display
All manuals and user guides at all-guides.com
to activate the device. All
to select the desired memory zone.
TOPCOM BPM Wrist 2000