Technical Specifications; Helpfull Tips - Topcom BPM ARM 1600f Mode D'emploi

3

Technical specifications

Power source
Measurement method
Measurement zone
Accuracy
Pressure sensor
Inflation
Deflation
Memory capacity
Auto-shut-off
Operation environment
Storage environment
Weight
Arm circumference
Limited patient
Dimensions
K.B.
Classification
*Specifications are subject to change without notice.
4

Helpfull tips

Here are a few helpful tips to help you obtain more accurate readings:
• Do not measure your blood pressure immediately after consuming a large
meal. To obtain more accurate readings, please wait one hour before
measuring.
• Do not smoke or drink alcohol before measuring your blood pressure.
• You should not do be physically tired or exhausted while taking a
measurement.
• It is important that you relax during measurement. Try to take 15-minutes
rest before a reading.
• Do not take measurements if you are under stress or under tension.
• Take your blood pressure at normal body temperature. If you are feeling
cold or hot, wait a while before taking a measurement.
• If the monitor is stored at very low temperature (near freezing), have it
placed at a warm location for at least one hour before using it.
• Wait about 5 minutes before taking the next pressure measurement.
6V DC: 4 x LR06 (AA) batteries
Oscillometric
Pressure: 20~280 mmHg
Pulse: 40~180 beats/minute
Pressure: ±3 mmHg
Pulse: within ±5% of reading
Semi-conductor
Pump driven
Automatic Pressure release valve
60 memories
60 seconds after last key operation
Temperature : 5°C~45°C(41°F~113°F)
Humidity : 40~85% RH max.
Temperature : -10°C~60°C (14°F~140°F)
Humidity : 10~95% RH max.
350g (without batteries)
24~36 cm
Over 18 years old
150(L) x 100(W) x 68(H) mm
Short time operation 2 minutes.
Classification of type BF
Topcom BPM Arm 1600f
5