Maintenance And Cleaning - brennenstuhl SL CN 150 V2 IP65 Mode D'emploi

Operating Instructions
D
MOuNTINg THE LED LIgHT ON THE TrIpOD
0.80 –1.62 m
Loosen screw (C). Unfold the feet of the tripod. Re-tighten screw (C).
Attach the LED light to the tripod with mounting screw (A), using the centre hole of the mounting
bracket.
To adjust the height of the tripod, loosen screw (B). Expand the tripod to the desired height and
re-tighten screw (B).

MaINTENaNCE aND CLEaNINg

Prior to cleaning and maintenance, please unplug the power cable from the outlet.
All maintenance work must be carried out by a qualified electrician.
PLEASE NOTE: The LED light does not contain parts that need servicing. The LED light source
cannot be replaced. If necessary, replace the entire light.
Do not use solvents, corrosive cleaners or the like. Use a dry or slightly moist cloth for cleaning
ONLY.
6
BA_Chip_LED_Leuchte_Stativ_0488521_160822.indd 6
a mounting screw
B screw
C screw
Chip LED Light with Tripod
22.08.16 12:52