Cleaning And Maintenance - brennenstuhl RL E27 IP 54 Mode D'emploi

013112 Brobusta RL 23.05.14 08:34 Seite 7
Brobusta RL

Cleaning and maintenance

The lamp does not have any parts that need to be maintained by the user. Never try to
open the lamp except for a change of lamp, see section "Insert or change of the lamp".
Unplug the lamp from the mains voltage before any cleaning activities. Clean the lamp
regularly with a dry, lint-free cloth. To remove more stubborn dirt, a slightly moistened
cloth can be used. Do not use any solvents, corrosive cleaning agents or similar which
might damage the lamp. For reasons of electrical safety the lamp must never be cleaned
with water or other liquids or even be dipped into water.
Disposal
Do not throw any electrical devices into your household waste!
According to the European Directive 2002 / 96 / EC on waste electrical and
electronic equipment (WEEE) and implementation into national law, all WEEE have to
be collected separately and sent for an environmentally sound recycling.
Currently applicable instructions for disposal can be obtained from your municipality.
Energy-saving lamps must not be disposed of in household waste. Please dispose of the
following lamps correctly via your local collection point.
Service address / Manufacturer
Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 · 72074 Tübingen · Germany
H. Brennenstuhl S.A.S.
5 rue de l'Artisanat · F-67460 Souffelweyersheim
lectra-t ag
Blegistrasse 13 · CH-6340 Baar
For further information we recommend to visit the Service/FAQ area on our homepage
under www.brennenstuhl.com.
Instruction Manual
7