Safety Notes - brennenstuhl SL CN 150 V2 IP65 Mode D'emploi

Operating Instructions
D
Chip LED Light with Tripod
Please note: Please read these instructions carefully prior to mounting the light and store them in
a safe location afterwards!
SpECIfICaTIONS
Model:
Protection class:
Type of protection:
Nominal voltage:
Output:
Cable:
Protective cover dimensions:
Tripod:
Weight:
Dimensions:
max. projected area:
The heavy-duty LED light is suitable for indoor and outdoor lighting applications. The chip LED
light with tripod is wired ready for connection and comes with a connecting cable and a safety
plug.
Note: The light is continuously horizontally adjustable within its pivoting range and can be locked
in position using the locking screws.

SafETy NOTES

1. Do not use this light without properly attached gaskets!
2. LED lights are extremely bright! Avoid looking straight into an LED light beam, as doing so
could result in irreversible eye damage.
3. Damaged protective covers must be replaced with an original Brennenstuhl protective cover
before the light can be used again.
4. If the mains supply cable of the light is damaged it must be replaced by a qualified technician
in order to avoid risks.
5. Make sure the tripod is securely placed and stable. Make sure the cable is not crimped or
otherwise damaged.
BA_Chip_LED_Leuchte_Stativ_0488521_160822.indd 5
SL CN 150 V2 IP65, SL CN 150 V2 IP65 GB
I
IP65
100 - 250 V~ 50/60 Hz
50 W (1 x 50 W)
5 m H07RN-F3G1.0
281.5 x 231 x 4 mm
extendable from 0.80 m – max. 1.62 m
6.3 kg
1485 x 760 x 140 mm
0.06 m²
5
22.08.16 12:52