■
Check the compressed air cleaning gun regu-
larly for possible cracks, damage and smooth
operation of the nozzle
■
The compressed air cleaning gun may not be
used if there are any abnormalities . In this is the
case, please contact a specialist .
Cleaning the nozzle
♦
Turn the valve
to the horizontal position and
pull the trigger
to clean the nozzle
compressed air .
♦
If the nozzle
is badly soiled, unscrew the
brush
by turning it anticlockwise . Remove the
nozzle
and clean it with fresh water .
General
♦
Before each use, check that there is no
condensate in the compressed air hoses .
♦
Use fresh water to clean the compressed air
cleaning gun, but never aggressive cleaning
agents . Turn the valve
position, so that when the trigger
only air comes out .
Dip the compressed air cleaning gun with the
brush into a container filled with fresh water .
Pull the trigger
to remove the dirt from the
brush
and nozzle
♦
Empty the cleaning fluid container
operation .
♦
Store the compressed air cleaning gun in a dry,
clean and frost-proof location .
■
18
│
GB │ IE
All manuals and user guides at all-guides.com
.
with
to the horizontal
is pulled,
.
after each
Disposal
The packaging consists of environmen-
tally friendly material . It can be
disposed of in local recycling containers .
Do not dispose of the appliance in the normal
domestic waste!
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled with
abbreviations (a) and numbers (b) with
the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites .
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
The product is recyclable, subject to
extended producer responsibility and
is collected separately .
PDRP 6.2 B2