HOMCOM A90-225 Instructions D'assemblage page 38

·SPEED QUICK Button：Direct Selection of Runtime Speed Values
Operational Description： In the running state of the computer, press this button to select the corresponding
6. Motion Mode Description
A、Manual Motion Mode
Enter the manual mode: After the computer is fully displayed on power, it enters the initial
Running instructions: Initial running speed is 0.8KM/H, time, distance, calorie window is counted
B、Countdown Mode Function
1. Enter the Countdown mode：In the initial standby state, select the time countdown mode by
Running instructions：The initial speed of 0.8 KM/H, set according to the operation of the time
2. Enter distance countdown mode：In the initial standby state, select the distance countdown mode
Running instructions：The initial running speed is 0.8KM/H, the distance window counts down
3. Enter calorie countdown mode： In the initial standby state, the calorie countdown mode is selected
speed value directly.
standby state. At this time, press the start button, and then it enters the
manual mode of operation.
positively from zero, according to the speed adjustment key, the value of
running speed can be adjusted。
Exercise time is more than 99:59 minutes, the system does not stop, and
the time starts from zero.
pressing the mode button. At this time, the time window shows 30:00
minutes and flickers to show that the required running time can be set by
the "SPEED +/- " button. The setting range is 8:00-99:00 minutes. Press
the start button to enter the time countdown mode.
window began to count down time, distance and starting from scratch is
counting calories window, press "SPEED +/- " button, the size of the
adjustable speed value, when setting the time down to zero, electronic
watch began to slowly stop running, speed is reduced to zero, return to
the initial standby mode automatically.
by pressing the mode button. At this time, the distance window
shows 0.8 kilometers and flickers. The required distance can be
set by "SPEED +/- " button. The range is 1.0-99.0 kilometers.
Press the start button to enter the distance countdown mode.
according to the set distance, the time and calorie window counts
positively from zero, and the "SPEED +/- " button can adjust the size
of the running speed value. When the set distance counts down to zero,
the computer starts to stop running slowly and automatically returns to the
initial standby state after the speed decreases to zero.
by pressing the mode button. At this time, the calorie window
displays 50 and flickers. The required running calories can be set
by the "SPEED +/- " button, and the range is 20-990. Pressing
the start button, the calorie countdown mode can be operated.
-12-