Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8327835
POWER TOOL PRECAUTIONS
1.
DO NOT use any power tool with a malfunctioning power
switch or control. A power tool that fails to respond to the
controls is dangerous and could cause an injury. A qualified
technician must repair and verify the power tool is
operating correctly before it can be used.
2.
Do not cover the air vents. Proper cooling of the motor is
necessary to ensure normal life of the tool.
3.
Avoid unintentional starting. Ensure the switch is off when
connecting to the power source.
4. Disconnect the power source before installing or servicing
the tool.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage. Make sure that all items in the contents are included.
Contents:
IDENTIFICATION KEY
A
Nozzle
B
Air Vents
C
Handle
D
LCD
E
Temperature Control
F
ON/OFF and Airflow Switch
G
Power Supply Cord
8
DIGITAL CONTROL ELECTRIC HEAT GUN
• Electric Heat Gun
For technical questions call 1-800-665-8685
V1.0
Fig. 1
Publicité
Table des Matières
