Electric Scheme (Tifon 900E) - Enarco TIFON Serie Manuel D'instructions

7

ELECTRIC SCHEME (TIFON 900E)

Power trowel TIFON 900 E is served with the handle disassembled from the machine. So, the
customer must assemble it to the machine and also connect the power cables to the motor. The
assembly of the handle is easy, just place the handle base in the bolts placed in the side the
gearbox. Then, put the washers and the nuts and tighten them firmly.
To connect the power cables to the motor these stops must be followed:
-
-
-
-
en
-
14
Remove the cover of the connections box.
Remove the gland seal of the connection box and the inner cap.
Insert the power cables into the connections box. In this step is very important to avoid that
the small plastic parts with numbers get lost. These numbers will help to connect the
cables.
Connect the cables following the scheme of the picture:
Finally, put the connections box cover in its place.
1
2
3
4
5
6
TROWELS WITH ELECTRIC OR PETROL ENGINE