Waste Disposal And Environmental Protection - IKRA EVL 1500 Manuel D'utilisation

Masquer les pouces Voir aussi pour EVL 1500:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
This setting will be suitable for the majority of lawns.
• Third setting. This setting will lightly rake or scarify
your lawn.
- Your machine as a raker can lift flattened grass and
stolons (the creeping stems of grasses and weeds
like clover) so that you can mow them. On this
setting, you can easily collect fallen leaves and left
grass cuttings.
- Your machine as a scarifier can remove the hardened
surface, moss and flat-growing weeds.
• Lowest setting. This setting should be used when you
transport or remove your machine.
9. MAINTENANCE
The advice given in this section covers the general care
and maintenance of the main body of your machine.
Do not use an extension cable which
shows signs of damage. Fit a new cable
completely - do not make any permanent
or temporary repairs.
• Always keep your machine clean and free from grass
cuttings, especially the underside of the deck and the
air vents.
• Check all electrical cables at regular intervals, looking
for signs of wear, abrasion or other damage.
• Remove the debris stuck to the bottom of the machine
with a spatula each time you finish mowing.
• Clean all plastic components with a damp cloth.
Do not use solvents or cleaning fluids as
these may damage the plastic components
of your unit.
10. REPAIR SERVICE
Attention! Electrical repairs may only be carried out by a
skilled electrician or a customer service workshop!
If you send the machine to us for repair, please describe
the fault.
11. WASTE DISPOSAL AND ENVIRONMENTAL
PROTECTION
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose of
the device together with your domestic refuse, but dis-
pose of it in an environmentally friendly manner. Please
dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can
be separated and recycled. Information concerning the
disposal of materials and devices are available from your
local administration.
All manuals and user guides at all-guides.com
GB-6

Publicité

Table des Matières
loading

Table des Matières