Waste Disposal And Environmental Protection; Spare Parts; Ec Declaration Of Conformity - IKRA IELM 1232 Manuel D'utilisation

Waste disposal and environmental protection

Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its im-
plementation in national law, waste electric tools must
be collected separately for environmentally-compatible
re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.

Spare parts

Please contact our service department if you need acces-
sories or spare parts.
We, ikra GmbH, Schlesierstraße 36, D-64839 Münster - Germany, declare under our sole responsibility that the
products Lawn Mower IELM 1232, to which this declaration relates correspond to the relevant basic safety and
health requirements of Directives 2006/42/EC (Machinery Directive), 2014/30/EU (EMC-Guideline), 2011/65/EU
(RoHS-Guideline) and 2000/14/EC+2005/88/EG (noise directive) incl. modifications. For the relevant implementa-
tion of the safety and health requirements mentioned in the Directives, the following standards and/or technical
specification(s) have been respected:
EN 60335-1:2012+A11:2014+A13:2017; EN 60335-2-77:2010
EN 62233:2008; EK9-BE52(v3):2014;
AfPS GS 2014:01 PAK
EN 55014-1:2017; EN 55014-2:2015; EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581:2012
measured acoustic capacity level
guaranteed acoustic capacity level
Competent institution: TÜV Süd Industrie Service GmbH, Westendstrasse 199, 80686 München (Notified Body 0036)
Conformity assessment method to annexe VI / Directive 2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally retrieved via the consecutive serial number.
Münster, 16.12.2019
Maintenance of technical documentation: Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
GB | Operating Instructions

EC Declaration of Conformity

92 dB(A)
96 dB (A)
Matthias Fiedler, Senior Product Manager Ikra GmbH
9
When working with this machine, do not use spare parts
other than those recommended by us. Using spare parts
not recommend by us can result in serious injuries to per-
sons or damage to the machine.
The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
Warranty
For this electric tool, the company provides the end user
- independently from the retailer's obligations resulting
from the purchasing contract - with the following war-
ranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. Wearing parts, rechargea-
ble batteries and defects caused by the use of non fitting
accessories, repair with parts that are not original parts
of the manufacturer, use of force, strokes and breaking
as well as mischievous overloading of the motor are
excluded from this warranty. Warranty replacement does
only include defective parts, not complete devices. War-
ranty repair shall exclusively be carried out by authorized
service partners or by the company's customer service.
The warranty shall not apply to commercial use of the
product. In the case of any intervention of not authorized
personnel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.