System Requirements - Speedlink Strike 2 Mode D'emploi

System requirements

• IBM compatible PC with a Pentium II 350MHz processor or faster
• 256 MB RAM or more
• Free USB port
• Windows® 98SE/ME/2000/XP
Note: Please note that USB operation is not supported by
Windows 95/NT.
Connecting
Install the driver software before connecting the gamepad to your
computer. Plug the USB connector into a USB port on your PC. Do not
plug the gamepad into a USB hub; plug it directly into a USB port on your
PC instead. Please note: when the gamepad is plugged in it might lead
to a change in the calibration. Briefly unplug the gamepad and plug it in
again after the software has been installed.
16