Domo DO7036S Mode D'emploi page 34

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
DO7036S
• Read all instructions before use.
• Before use, check if the voltage stated on the
appliance corresponds with the voltage of the power
net. You can adjust the voltage of the travel iron
by turning the voltage screw to the
desired position with a coin. It is
recommended to reset the voltage
to 220-240 V after each use. This
will avoid damage if the iron is
accidentally connected to the wrong
voltage.
• The travel iron needs to be used and stored on a stable
surface.
• Unwind and straighten the cord before use.
• Do not let the cord touch the soleplate.
• The plug needs to be removed from the socket before
filling the water tank with water.
• Empty the water tank after each use.
• Do not let the cord hang on a hot surface or over the
edge of a table or counter top.
• Never use the appliance when the cord or plug is
damaged, after malfunction or when the appliance is
The appliance can become hot during
use. Keep the power cord away
from hot parts and do not cover the
appliance.
34

Publicité

Table des Matières
loading

Table des Matières