auna Areal Bar 750 Mode D'emploi page 35

Opticai/coaxial (digital inputs) operation
1. Ensure that the unit is well connected to the TV or other audio device via
Optical cable [ not included) or Coaxial cable [not included).
2. While in Power On mode, press the Mode button on the main unit or
press the Mode button on the remote control to select the OPTICAL or
COAXIAL mode.
3. Operate your audio device directly for playback features.
4. Press the / buttons on the remote control or the "+"/ "-" buttons on
the main unit to raise/lower the volume level.
Note: If there is no sound coming out from the sound bar make sure the
audio [digital output) setting of your source player [e.g. TV, DVD player,
game player] is set to PCM.
3.5 mm aux inputs operation
1. Ensure that the unit is well connected to the TV or other audio device via
a 3.5mm audio cable ( Included].
2. In Power On mode, press the Mode button on the main unit or the Mode
button on the remote control to select the ALIX input mode.
3. Operate your audio device directly for playback features.
Usb playback
This sound bar has also been developed in line with the latest technical
advances in the USB field.
The wide range of different USB storage devices of all types which are
currently on the market,
unfortunately do not allow us to guarantee full compatibility with all USB
storage devices. For this
reason, in rare cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Connect a USB storage device directly into the port, after a few seconds,
it will start music playback automatically.
2. Press the  or  buttons on the remote control to skip to the previous
or next track
HDMl(ARC)
Use to connect compatible devices using a HDMI cable(not provided)
Note: During any input mode, if you plug a USB storage device into the unit,
the input mode will automatically change to USB playback mode.
EN
35