auna Areal Bar 750 Mode D'emploi page 34

EN
34
remote control for 3 seconds to break the current connection and initiate
pairing mode
3. The player will also be disconnected when your device is moved beyond
the operational range. If you want to reconnect your device to this
player, place it within the operational range.
4. If the device is moved beyond the operational range, when it is brought
back, check to see if the device is still connected to the player.
5. lf the connection is lost, follow the instructions above to pair your device
to the player again.
6. Press the / buttons on the remote control or the"+"/"-" buttons on
the main unit to raise/lower the volume level.
7. To disconnect the BT function, switch to another function on the unit or
disable the function from your BT device.
Tips:
1. If a mobile phone on which you are playing music receives a call, the
music will be interrupted. The sound however is not played back via the
speaker. After you have ended the call, thedevices are connected to each
other again and playback continues.
2. If there is an existing connection, press and hold the BT button on the
remote control for 3 seconds to break the current connection and initiate
pairing mode
3. The player will also be disconnected when your device is moved beyond
the operational range. If you want to reconnect your device to this
player, place it within the operational range.
4. If the device is moved beyond the operational range, when it is brought
back, check to see if the device is still connected to the player.
5. If the connection is lost, follow the instructions above to pair your device
to the player again.