Technical Data - Hilti C 7 Mode D'emploi

Symbols
Read the The disposal
operating of batteries
instructions with
before use. household
waste is not
permissible.
For indoor
use only
2 Description
2.1 Use of the product as directed
The appliance is designed to charge Hilti
lithium-ion (Li-Ion) batteries of the type B 7/1.5
Li-ion with a rated voltage of 7.2 V.
The working environment may be as follows:
construction site, workshop, renovation, con-
version or new construction.
Tampering with or modification of the appli-
ance is not permissible.
Observe the information printed in the operat-
ing instructions concerning operation, care and
maintenance.
Nationally applicable industrial safety regula-
tions must be observed.
Observe the safety precautions and operating
instructions for the accessories used.
To avoid hazards, use only batteries of the
approved type.
The appliance is designed for professional use
and may be operated, serviced and maintained

3 Technical data

Right of technical changes reserved.
Charger
Cooling
Mains voltage
Mains frequency
Battery
All manuals and user guides at all-guides.com
Return waste Lock symbol
material for
recycling.
Location of identification data on the appli-
ance
The type designation and serial number can be
found on the type identification plate on the
appliance. Make a note of this data in your
operating instructions and always refer to it
when contacting your Hilti representative or
service center.
Type:
Serial no.:
only by trained, authorized personnel. This per-
sonnel must be informed of any special hazards
that may be encountered. The appliance and
its ancillary equipment may present hazards
when used incorrectly by untrained personnel
or when used not as directed.
The appliance may be operated only when con-
nected to an electric supply providing a voltage
and frequency in compliance with the informa-
tion given on its type identification plate.
Do not use the battery as a power source for
other unspecified appliances.
The C 7 charger complies with radio equipment
interference requirements for use in all EU and
EFTA countries.
2.2 Items supplied as standard
1 Charger
1 Operating instructions
C 7
Cooling by convection
220...240 V
50...60 Hz
Li-ion
en
11