Flash Bracketing Series (Fb); Extended Zoom Mode (Zoom Ext) - Metz MECABLITZ 58 AF-1 digital Mode D'emploi

Masquer les pouces Voir aussi pour MECABLITZ 58 AF-1 digital:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
707 47 0030.A3
03.03.2010
Setting procedure:
• Press the „Sel" button repeatedly until „Select" appears on the display.
• Use the UP
and DOWN
selected menu item will be highlighted against a dark background.
• Press the „Set" key to confirm the special function selection.
• Choose the setting desired using the UP
takes effect immediately.
• Press „Return"
repeatedly to return the display to its normal reading. If the
„Return" key
not pressed, the display will switch back to normal automati-
cally after approximately 5 seconds.

7.3 Flash Bracketing Series (FB)

A series of flash exposures (flash bracketing, FB) can be made in Automatic
Flash Mode. A flash bracketing series consists of three successive flash shots with
different flash exposure correction values.
When a flash bracketing series is set, FB and the correction value appear on the
display. The possible correction values range from 1/3 to 3 apertures in one-
third aperture increments.
The camera does not enable flash bracketing to be set on the flash unit in
the TTL flash modes.
Setting procedure:
• Switch the flash unit to Automatic Flash Mode A (see also 5.4)
• Press the „SEL" button repeatedly until „Select" appears on the display.
• Select the menu option „FB" by pressing the UP
selected menu option will be highlighted.
• Confirm the selection of the special function by pressing the „Set" button.
• Select the desired setting with the UP
takes effect immediately.
• Press the „Return" button
All manuals and user guides at all-guides.com
13:03 Uhr
Seite 99
buttons to select „BEEP" from the menu. The
and DOWN
arrows. The setting
and DOWN
and DOWN
buttons. The setting
repeatedly until the screen is reset to its normal
view. If the „Return" button
reset to its normal view after about 5 seconds.
When „FB 0" is displayed, the flash bracketing series is deactivated.
• The first shot is taken without a correction value. „FB 1" will also appear on the display.
• The second shot is taken with minus correction. „FB 2" and the minus correc-
tion value (EV) will also appear on the display.
• The third shot is taken with plus correction. „FB 3" and the plus correction
value (EV) will also appear on the display.
• After the third shot, the flash bracketing series is automatically deleted. „FB"
will disappear from the display.
When the flash bracketing series is set, the correction value is always
shown as a positive value!
A

7.4 Extended Zoom Mode (Zoom Ext)

In the extended zoom mode, the focal length of the main reflector is reduced to
one level below the focal length of the camera lens. The resulting broader light
coverage provides additional dispersed light (reflections) inside rooms so that a
softer flash illumination is possible.
Example:
The focal length of the camera lens is 50 mm. The extended zoom mode sets a
35 mm reflector position on the flash unit. However, 50 mm continues to be
shown on the display.
• When „Ext ON" is displayed, the extended zoom mode is activated.
• When „Ext OFF" is displayed, the extended zoom mode is deactivated.
buttons. The
Setting procedure:
• Press the „SEL" button repeatedly until „Select" appears on the display.
• Select the menu option „ZoomExt" by pressing the UP
The selected menu option will be highlighted.
is not pressed, the display is automatically
and DOWN
keys.
99

Publicité

Table des Matières
loading

Table des Matières