Parameters Setting; Low Stabilisation Temperature; High Stabilisation Temperature; Stabilisation Time Of The Top Level - Ugin DUCAGEL Z1 Mode D'emploi

Instructions for use (rev 110121)

5.1.2. PARAMETERS SETTING

5.1.2.1. LOW STABILISATION TEMPERATURE

- Press the key
temperature/time display (No. 2).
- The adjustment range extends up to 30°C to 75°C (preset to 45°C).
- Select the value with the keys

5.1.2.2. HIGH STABILISATION TEMPERATURE

- Press again the key
temperature/time display (No. 2).
- The adjustment range extends up to 75°C to 99°C (preset to 94°C).
- Select the value with the keys

5.1.2.3. STABILISATION TIME OF THE TOP LEVEL

- Press again the key
temperature/time display (No. 2).
- The adjustment range extends up to 10 minutes to 30 minutes maximum (preset to 10 minutes).
- Select the value with the keys

5.1.2.4. VALIDATION

- Press the key
time of the top level.
- Repeat the operation for each program.
UGIN DENTAIRE
to set the low stabilisation temperature: the letter b appear to the left on
and
to set the high stabilisation temperature: the letter h appears to the left on
and
to set the stabilisation time of the top level: the letter t appears to the left on
and
to validate all parameters set: low and high stabilisation temperature and stabilisation
DUCAGEL Z1
20