NSK NLX nano Mode D'emploi page 8

CAUTION
· Do not Autoclave (or any other high temperature Sterilization) Motor Cord.
· Do not lubricate the motor.
· Do not autoclave the motor, even when it is bagged, together with other instruments, from which chemicals are not
sufficiently cleaned. This is to avoid discoloration and/or damage to the plating of the motor.
· Do not wash, soak, or wipe off the motor with/in the oxidation potential solution (strong acid, super acid solution) sterilized
solution, strong alkaline solution or functional water.
· The motor is kept in suitable atmospheric pressure, temperature, humidity and ventilation. Moreover, air does not include a
dust, salt and sulfur.
· Do not sterilize with dirt on the surface. It might cause rust.
· You can hang Autoclave Plug on the Hunger Post to prevent loosing it.
· Do not hung the Autoclaving Plug with motor. It may drop the motor and cause damage.
· Do not touch the handpiece just after the autoclave. It may very hot.
· We do not recommend you to sterilize on plasma sterilization or EOG stabilization.
7