NSK NLX nano Mode D'emploi page 5

2. Motor
2-1 Connecting / Disconnecting the Motor and the Motor Cord
Align and insert firmly the motor pin into the pin holes of the Motor Cord
Connector, and fasten the Motor Cord Nut securely. ( Fig. 1 )
To remove the Motor Cord from the Motor, unscrew and detach the Motor Cord
Nut, and gently pull out the Motor Cord Connector.
2-2 Connectioning / Disconnecting the motor and the handpiece ( Option )
To insert the E-type handpiece in the Motor Insert, align handpiece and Motor,
then turn those until its click. ( Positioning pins are aligned )
To remove the handpiece, simply pull out the handpiece from the Motor.
Handpiece is not included.
4
Motor Cord Connector
Motor Cord
Motor
Positioning Pin
Motor Insert
Handpiece ( Option )
Fig. 1
Fig. 2