CAME BXL Serie Manuel D'installation, D'utilisation Et D'entretien page 47

FINAL OPERATIONS
FASTENING THE COVER
Once the electrical connections are done and the set up is finished, fasten the cables to the gearmotor jumper
using a cable tie.
Fit the cover and fasten it to the sides using the screws.
TROUBLESHOOTING
ISSUES POSSIBLE CAUSES
It neither opens • Power supply is missing
nor closes • The gear motor is stuck
• The transmitter doesn't work
• The transmitter is broken
• the stop button is either stuck or broken
• The opening/closing button or the key-switch selector
is stuck
The gate opens • The photocells are dirty
but does not
close
2
FIXES
• Check main power supply
• Lock the gearmotor
• Replace the batteries
• Call for assistance
• Call for assistance
• Call for assistance
• Clean and check proper
functioning of the photocells
1