Listening To The Xm - Pioneer SUPER TUNER III D DEH-P860MP Mode D'emploi

XM tuner

Listening to the XM

1 2
5
You can use this unit to control a XM satellite di-
gital tuner (GEX-P910XM), which is sold
separately.
For details concerning operation, refer to the
XM tuners operation manuals. This section
provides information on XM operations with
this unit which differs from that described in
the XM tuners operation manual.
! This unit does not have the text scroll
function.
! With this unit, you can operate one addi-
tional function: XM channel direct
selection.
1 XM channel name
Shows the channel name of broadcast
channel.
2 XM channel select setting indicator
Shows what channel select setting has
been selected. CH.No is displayed when
Channel Number is selected, and
CATEGORY is displayed when Category is
selected.
3 XM preset number indicator
Shows what XM preset has been selected.
4 XM band indicator
Shows the XM band which has been
selected.
5 XM channel number indicator
Shows to which XM channel number the
tuner is tuned.
3 4
1
Press SOURCE until you see XM displayed.
2
Press BAND/ESC repeatedly until the desired
XM band is displayed, XM1, XM2 or XM3.
3
MULTI-CONTROL left or right.
The channels move up or down step by step.
Channels that cannot currently be selected
are skipped, and the next channel is selected.
# If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selecting the channel
in the channel category on page 41.)
Press SOURCE to select the XM.
Press BAND/ESC to select a XM band.
To perform tuning, push
Section
08
39
En