Listening To The Radio - Pioneer SUPER TUNER III D FH-P5000MP Mode D'emploi

Tuner

Listening to the radio

These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1 Stereo (5) indicator
Shows that the frequency selected is being
broadcast in stereo.
2 Band indicator
Shows which band the radio is tuned to, AM
or FM.
3 Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Use Multi Control to adjust the sound
level.
Turn it to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, F1, F2, F3 for FM or AM.
4 To perform manual tuning, push
Multi Control left or right.
The frequencies move up or down step by
step.
5 To perform seek tuning, push and hold
Multi Control left or right for about one
second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
Multi Control left or right.
# If you push and hold Multi Control left or
right you can skip stations. Seek tuning starts as
soon as you release Multi Control.
Section
04
13
En