Using Compression And Bmx; Entering Disc Titles - Pioneer SUPER TUNER III D DEH-P860MP Mode D'emploi

Section
05 Built-in CD Player
2 Push and hold MULTI-CONTROL left or
right to search every 10 tracks on a disc.
# If a disc contains less than 10 tracks, pushing
and holding MULTI-CONTROL right recalls the
last track of the disc. Also, if the remaining num-
ber of tracks after searching every 10 tracks is
less than 10, pushing and holding
MULTI-CONTROL right recalls the last track of
the disc.
# If a disc contains less than 10 tracks, pushing
and holding MULTI-CONTROL left recalls the first
track of the disc. Also, if the remaining number of
tracks after searching every 10 tracks is less than
10, pushing and holding MULTI-CONTROL left re-
calls the first track of the disc.

Using compression and BMX

Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Use MULTI-CONTROL to select
COMP/BMX.
The function name tag COMP/BMX is high-
lighted.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
Press MULTI-CONTROL repeatedly to switch
between the following settings:
OFFCOMP 1COMP 2OFFBMX 1
BMX 2

Entering disc titles

You can input CD titles and display the title.
The next time you insert a CD for which you
22
En
have entered a title, the title of that CD will be
displayed.
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
! When playing a CD TEXT disc, you cannot
switch to DISC TITLE. The disc title will
have already been recorded on a CD TEXT
disc.
1 Play the CD that you want to enter a
title for.
2 Use MULTI-CONTROL to select
DISC TITLE.
The function name tag DISC TITLE is high-
lighted.
3 Press button 1 to select the desired
character type.
Press button 1 repeatedly to switch between
the following character types:
Alphabet (upper case), numbers and symbols
Alphabet (lower case)European letters,
such as those with accents (e.g., á, à, ä, ç)
# You can select to input numbers and symbols
by pressing button 2.
4 Push MULTI-CONTROL up or down to
select a letter of the alphabet.
Each pushing MULTI-CONTROL up will dis-
play a letter of the alphabet in A B C ... X Y Z,
numbers and symbols in 1 2 3 ... @ # < order.
Each pushing MULTI-CONTROL down will dis-
play a letter in the reverse order, such as Z Y X
... C B A.
5 Push MULTI-CONTROL right to move
the cursor to the next character position.
When the letter you want is displayed, push
MULTI-CONTROL right to move the cursor to
the next position and then select the next let-
ter. Push MULTI-CONTROL left to move back-
wards in the display.