Accessories - Hendi MACHINE PROFI LINE 410 Mode D'emploi

A. SET button
With the lid (1) open, press the "SET" button to
set the time of the 3 processes (VACUUM TIME,
SEAL TIME and COOLING).
B. Time adjust button (
Press these buttons to adjust the time for each
process (VACUUM TIME, SEAL TIME and COOL-
ING) of setting.
C. STOP button
It STOPS the current process and switch to next
EN
process (e.g. Stop "Vacuum" process & switch to
"Seal" process).
D. Digital display
1. Shows the remaining time of the processes
that's being executed (VACUUM TIME, SEAL
TIME and COOLING).
2. When the vacuum and sealing process is fin-
ished and the lid (1) is still closed the display
will show "CLO".

Accessories

a. Wrench (1x)
b. Screw driver (1x)
c. Empty bottle with nozzle (1x)
6
F
A
Increase / Decrease)
E D
B
E. Light indicators (VACUUM TIME / SEALING / GAS
/ COOLING)
Important: "GAS" function is not available for
this model
1. With the lid (1) open, the light indicator will
light up blue, press the
time of the corresponding process.
2. During each of the processes, the correspond-
ing light indicator is blinking to show which
part of the process is active.
F. Vacuum gauge
This gauge shows the pressure level inside the
vacuum chamber.
d. A bottle of pump oil (Volume: 300ml) (1x)
Note: Vacuum bag is not included.
C
or to adjust the