Sony STR-DE905G Mode D'emploi page 20

Preparing and Using the Remote
3
Click the appropriate function.
VIDEO
VIDEO
VIDEO
LD
TV/DBS
DAT/MD
CD
TAPE
RETURN
4
Click "Sony" for a Sony product or OTHER for a
non-Sony product.
MAKER
OUTPUT
RETURN
If the program source is a Sony product
The IR codes are programed automatically and
registration is complete (click RETURN or EXIT).
To take advantage of CONTROL-A1 compatible audio
components, such as multi-disc CD players, click
CONTROL-A1 to select CONTROL-A1.
5
Click the respective program source.
MAKER
OUTPUT
VCR
RETURN
EN
20
All manuals and user guides at all-guides.com
IR CODE SETTING
1 Sony VTR3
2 Sony VTR1
3 Sony VTR2
Sony LD
Sony DBS
Sony DAT
Sony CD1
Sony TAPE
EXIT
IR CODE SETTING
Sony OTHER
IR
EXIT
IR CODE SETTING
Sony OTHER
IR
TV TAPE
LD DAT
CD
MD
EXIT
If the equipment is not a video deck or laser disc
player
Cover the IR sensor on the equipment to prevent
accidental operation during the programing procedure,
click START, then go to step 6.
IR CODE SETTING
MAKER Sony
OUTPUT IR
VCR TV
LD
CD
RETURN START
If the equipment is a video deck or laser disc player:
1 Click START.
A list of other manufacturers appears.
2 Click the manufacturer of the respective equipment
and the IR codes for that program source are
registered automatically. (If the manufacturer is not
listed, cover the IR sensor on the equipment to
prevent accidental operation during the programing
procedure, click "OTHER", then go to step 6).
3 Click TEST.
If the selected program source turns on, it means the
IR codes have been registered. This ends the
procedure.
If the program source does not turn on, click the
number button beside the manufacturer's name to
select another number, then click TEST again. If the
program source still does not turn on, cover the IR
sensor on the equipment to prevent accidental
operation during the programing procedure, click
"OTHER", then go to step 6.
When using a video deck from another manufacturer
(Australian, Malaysian, and Singaporean models)
Check to see if the supplied remote uses -/-- or 1- and 2-
buttons to enter 2 digit TV channels.
Since the -/-- or 1- and 2- codes are not pre-
programmed in this unit, do the following operations to
program these codes manually.
1 Select the manufacturer (as shown in step 2 above).
2 Click -/-- 2- CODE SET.
VCR MAKER SETTING
1 2 3 4 AKAI
EMERSON
FISHER 1 2 3 4 GE
PANASONIC 1 2 JVC
TOSHIBA 1 2 RCA
MISTUBISHI 1 2 3 SANYO
GRUNDIG SHARP
HITACHI ZENITH
PHILIPS OTHER
– / – – 2 – CODE SET
RETURN TEST
OTHER
TAPE
DAT
MD
EXIT
1 2
1 2
1 2
1 2
1 2
EXIT