Burg Wächter secuENTRY easy PINCODE Guide De Montage page 38

All manuals and user guides at all-guides.com
Dismantling of secuENTRY easy keypad from wall holder
• Remove the housing cover on the bottom side by loosening the
2 screws (Tx 8).
• Pull the battery compartment lid downwards until it disengages and
replace the batteries.
• Press the latch using a narrow tool (e. g. flat-bladed screwdriver)
downwards and slide the keypad upwards.
Interference from Bluetooth devices
Bluetooth devices use the same frequency band (2.4 GHz) as WiFi devices.
This can cause interference leading to errors or even to communication
failure. In such case, any devices not required should be kept disconnected
from power.
40 | English
In order to be able to pro
products and an optimal
need you to present fault
a valid administrator cod
document attached.
When you return a devic
from the purchase agreem
settings and the seal on t
of noncompliance with th
Dear customer,
Please help us avoid unne
Should you intend to disp
that many components o
be recycled.
secuENTRY easy
Warranty
Disposal
Please be a
batteries sh
rather colle
collecting p
authority o
BURG-WÄC
with Direct
2011/65/EU
Conformity
www.burg