Submenu Delete
Using this menu, you can delete a user.
• Activate the keypad using the
• Then press FUNC, the Code Change menu is displayed
• Scroll using the 2 key till reaching the Administrator menu
• Confirm with
• Scroll using the 2 key till reaching the "Delete" item
• Enter the administrator code in order to acquire the authorisation
• Scroll till reaching the user or the identification medium (transponder)
• "Data has been deleted" is displayed
Time Functions submenu (Premium only)
This is intended for setting the time and date
Setting the time:
Not available as a standard function.
Setting the date:
Not available as a standard function.
Setup submenu
General system settings
Register
After a replacement of the cylinder or the keypad, the two units have to
be newly aligned, so that they can resume communication.
Registration of a keypad
• Activate the keypad using the
• Then press FUNC, the Code Change menu is displayed
• Scroll using the 1 or 2 keys till reaching the Administrator menu
• Confirm with
• Now scroll using the 1 or 2 keys until reaching the Admin. Setup menu
• Confirm with
• Enter the admin code of the unit to be registered
• "Data has been saved" is displayed after a successful registration
Attention! Make sure that no other powered secuENTRY unit is
placed within a direct reach of the device when registering a new
keypad or a new cylinder, as such unit could be mistakenly addressed
instead of the intended one. When in doubt, disconnect such units
from power before the registration (remove batteries).
secuENTRY easy
secuENTRY easy
All manuals and user guides at all-guides.com
for programming
you wish to delete and confirm your selection 2 × with
key
key
English | 31