Burg Wächter secuENTRY easy PINCODE Guide De Montage page 35

Attention! Do not use more liquid than absolutely necessary.
• Slide the keypad in from above until the
• Perform a function test of the unit with the
• Remove the housing cover on the bottom side by loosing
• Pull the battery compartment lid downwards until it disengages and
secuENTRY easy secuENTRY easy
All manuals and user guides at all-guides.com
locking peg of the mounting plate engages
into the keypad housing. In this way, the
keypad is protected against undesired removal.
door open. For this purpose, enter repeatedly
a valid opening code (e. g. PIN code,
fingerprint, ...).
Battery replacement for the secuENTRY easy keypad
the 2 screws (Tx 8).
replace the batteries.
When inserting the new batteries, be careful to observe
the correct polarity as indicated on the housing.
English | 37