Data Table; Programming Procedure - Hach POCKET COLORIMETER II LCK 310 Instructions De Fonctionnement

System start up
• LCK 310: 0.05-2 mg/l Cl
Select the calibration data of maximum two measuring ranges which will be the
suitable one.
Each programming procedure has only to be followed once prior to the first test
evaluation.
For detailed information please read the POCKET COLORIMETER II instruction
manual.
3.2.2

Data table

3.2.2.1 Evaluation as Chlorine Cl
Table 1 Evaluation as Chlorine Cl
RES (resolution)
S0 (standard 0)
A0 (absorbance 0)
S1 (standard 1)
A1 (absorbance 1)

3.3 Programming procedure

Note: Each programming procedure has only to be followed once prior to the first test
evaluation.
Important Note: The following programming procedure is valid for the evaluation
form Chlorine Cl . To evaluate as Chlorine dioxide ClO
2
the data mentioned in table
ClO2 and Ozone O3.
Note: After programming the calibration data, it could be helpful to mark the channel(s) 1
and/or 2 accordingly with a label.
3.3.1 LCK 310 Chlorine Cl
1. Press POWER to switch on the instrument.
2. Press MENU. "SEL" is displayed. A flashing arrow indicates the current
measuring range (1 or 2).
3. Select measuring range 1 or 2 for LCK 310 (0.05-2 mg/l Cl
GREEN
Note: Press
22
All manuals and user guides at all-guides.com
or 0.09-3.8 mg/l ClO
2
LCK 310
Chlorine
--.--
00.05
0.015
02.00
0.580
3.2.2.1 Evaluation as Chlorine Cl2, Chlorine dioxide
2
key to toggle between measuring ranges.
or 0.05-2 mg/l O
2
, Chlorine dioxide ClO
2
, Chlorine dioxide ClO
2
LCK 310
Chlorine dioxide
--.--
00.09
0.015
03.80
0.600
2
3
and Ozone O
2
and Ozone O
2
LCK 310
Ozone
--.--
00.05
0.025
02.00
0.900
or Ozone O please choose
3
).
2
3
3