Adjusting Trimmer For User; Using With Stihl Ar Battery - Stihl FSA 130 R Notice D'emploi

English
6.6 Removing and Installing Metal
Cutting Attachment
6.6.1 Mounting Metal Cutting Attachment
► Switch off the trimmer and pull the connecting
cable plug out of the socket.
► Place the thrust plate (5) on the shaft (6) so
that its smaller diameter faces up.
► Place the metal cutting attachment (4) on the
thrust plate (5). If you are fitting a circular saw
blade or a grass cutting blade with more than
4 cutting edges: Its cutting edges must face in
the same direction as the arrow on the deflec‐
tor.
► Place the thrust washer (3) on the metal cut‐
ting attachment so that its raised side faces
up.
► Place the rider plate (2) on the thrust washer
(3) so that its closed side faces up.
► Insert the stop pin (7) in the bore as far as
stop and hold it depressed.
► Rotate the metal cutting attachment (4) clock‐
wise until the stop pin (7) engages in position.
The shaft is now blocked.
► Fit the nut (1) counterclockwise and tighten it
down firmly.
► Remove the stop pin (7).
6.6.2 Removing the Metal Cutting Attach‐
ment
► Switch off the trimmer and pull the connecting
cable plug out of the socket.
► Insert the stop pin in the bore as far as stop
and hold it depressed.
► Rotate the metal cutting attachment clockwise
until the stop pin engages in position.
The shaft is now blocked.
34
► Unscrew the mounting nut clockwise.
► Remove the rider plate, thrust washer, metal
► Remove stop pin.
7.1
1
7.1.1
2
The connecting cable can be fitted and adjusted
3
to suit the user's size and the application.
4
5
6
7
The connecting cable can be secured in position
by the guide (1) on the harness and the fasten‐
ers (2), or on the side of the backplate with the
fasteners (2).
The length of the connecting cable can be adjus‐
ted by making a loop on the backplate (3) or at
one side (4).
► Arrange the connecting cable so that it is as
7.1.2
► Put the battery on your back.

7 Adjusting Trimmer for User

cutting attachment and thrust plate.
7 Adjusting Trimmer for User

Using with STIHL AR Battery

Fitting and Adjusting the Connecting
Cable
1
2
2
2
3
short as possible without hindering your work.
Fitting and Adjusting the Carrying Sys‐
tem
2
2
2
4
1
0458-725-9621-C