TROUBLESHOOTING
TROUBLESHOOTING
PROBLEM
Water is leaking
from the back of
the machine
Brewing cycle
finishes before
the ready signal
Steam when
grinding and
brewing
Total brewing
time on LCD
screen changes
mid-cycle or is
different each time
'CLEAN COFFEE
CHUTE' on LCD
screen
32
BDC650BSS_USC_IB_E20_FA.indd 32
POSSIBLE CAUSES
Water tank is overfilled.
If using the gold tone
filter, this is normal.
The total brewing time
displayed on the LCD
screen is calculated using
paper filters as coffee
passes through paper
filters slower.
This is normal.
It is the rear steam vent
releasing steam.
The total brewing time
displayed at the start of
the cycle is an estimate
only and may change
mid-cycle or vary each
time depending on the
starting temperature
of the water in the
water tank.
Grinding burrs and coffee
grinds chute need to be
cleaned. We recommend
doing this immediately
to avoid clogging and
overflowing of the coffee
basket.
WHAT TO DO
Do not exceed the 12 cup maximum.
The machine will beep when full
and the water level float will rise to
indicate the maximum level.
•
Thoroughly clean the coffee
basket and gold tone filter
to ensure they are clear and
unclogged of any coffee grinds.
•
Check the bean hopper for any
foreign body.
•
Refer to 'Cleaning the Grinding
Burrs and Coffee Grinds Chute',
page 23.
24/1/20 9:41 am