Atag HI1171M Notice D'utilisation page 89

CONTROLS
Switching on and adjusting the setting
Switching off
Residual heat indicator
1. Put a pan on a cooking zone.
2. Press the appropriate on/off
A - will appear in the display,
3. Select the required setting using the +/- button.
Setting 5 will appear in the display. If you do not select a setting,
the zone will switch off automatically after a few seconds.
1. Press the appropriate on/off
The display will go out.
You can also switch the zone off by pressing the – button
until the "-" in the display appears.
If a cooking zone has been used intensively it will retain heat for
several minutes afterwards. As long as the cooking zone is still hot
an "H" will be visible in the display.
GB8
setting the controls
button.
button