Atag HI1171M Notice D'utilisation page 107

INSTALLATION INSTRUCTIONS
5. Remove the protective layer from the sealing tape and apply
the tape in the groove of the aluminium profile or on the
edge of the glass plate. Do not stick tape round the corners,
but cut 4 separate pieces to seal the corners well.
6. Turn the hob over and lay it in the recess.
7. Connect the appliance to the mains. A short bleep will be
heard and all the displays will light up briefly. The appliance
is ready for use.
8. Check that it works properly. If the appliance has been
wrongly connected either a bleep will sound or nothing will
appear in the displays, depending on the error.
9. Hand the instructions to the client or keep the manual
yourself.
GB26
building in