Technical Data - HASE Cartago Manuel D'installation

12. Technical Data

The Cartago, certified in compliance with DIN-EN 13240, can only be oper-
ated when the fire box is closed. Conforms with the DIBt (Deutschen Institut für
Bautechnik/German Institute for Building Technology) approval criteria for direct
vent fireplaces for solid fuels. Multiple connections to the chimney are possible,
see point 4. "Connection of Multiple Devices in Direct Vent Operation".
VKF-No.: 25197; DIBt approval number: Z-43.12-376 / Typ FC41x und FC51x
The following data applies to the chimney characteristics in accordance with EN
13384-1 / 2
Combustion Values
Nominal Thermal Output
Efficiency
Particulate
CO content at 13% O2
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output
Min. required combustion air volume
Depending on the insulation of the building, the nominal thermal output of 7 kW
indicated on 25 bis 95 m² (subject to change)
Dimensions: Height
Stove 132,5 cm
Fire box 65 cm
Weight
Flue pipe diameter
Pipe diameter of Hase ventilation system*
* For separate air supply in low-energy houses and insufficient combustion air
supply in the room where the stove is installed.
All manuals and user guides at all-guides.com
Wood
7 kW
78 %
<20 mg/m³
500 mg/m³
7 g/s
335 ˚C
12 Pa
30 m³/h
Width Depth
35,5 cm 53 cm
20 cm 27,5 cm
168 kg
15 cm
10 cm
Front view
35,5
Top view
18
Side view
10-16
Inst. of Hase air system
below
Dimensions in cm
39