I - Initial Checks; Unpacking The Clock; Cleaning; Pre-Requisit - Bodet Time Profil 960 Manuel D'installation Et De Mise En Service

I - Initial checks

Thank you for choosing a BODET clock.
This product has been carefully designed for your satisfaction, using ISO 9001 quality processes.
We recommend that you read this manual carefully before handling the clock.
Retain this manual for reference throughout the operating life of your clock.
Using the clock in a manner not according to these instructions may cause irreversible
damage to the clock and invalidate the product guarantee.
These instructions relate to «NTP» models. For other models please see the corresponding
instructions.

1.1 Unpacking the clock

Carefully unpack the clock and check the contents of the package. This should include:
– the Profil 960 clock and this manual,
– an antistatic cleaning kit,
Version: inside the clock is a product label stating the version of the clock:
NTP = the clock is a receiver controlled by a master clock or an NTP server.

1.2 Cleaning

Use an antistatic product identical to that supplied. Never use alcohol, acetone or other solvents
which may damage your clock's casing or glass.

1.3 Pre-requisit

For the commisioning of the clocks you must install «BODET Detect». This software is available
on BODET web site www.bodet-time.com as a free download.
Note: the Ethernet network connection to which the Bodet clock is connected must be PoE, the
power being supplied by a PoE switch or a PoE injector.
Bodet recommends the following devices:
■ PoE injectors: Zyxel, Tp link, D-Link, HP, Cisco, Axis, ITE Power Supply, PhiHong, Abus,
Globtek.
■ PoE switches: D-Link, HP, Planet, Zyxel, Cisco, NetGear, PhiHong.
19