I - Initial Verification; Safety Instructions - Bodet Time 5 Notice D'installation

I – Initial verification
Thank you for choosing a BODET Style clock support bracket kit.
Non-contractual data. Bodet reserves the right to make certain functional, technical, design and
colour changes to its devices without prior notice.
This manual refers to support brackets for clocks in the BODET Style II range.

1.1 Safety instructions

The metal parts that make up the bracket must be connected to the earth if the clocks are
powered by the mains. A 16A phase-neutral rapidly accessible circuit breaker must be used in
the power line for protection and to allow for the disconnection of the power during maintenance
operations.
The powering up of the equipment can only be done after completion of the installation.
The screws and wall plugs must be adapted to the nature of the wall where the bracket is to be
installed. The fastening must be able to hold 3 times the weight of the clocks (minimun 5 Kg).
4
EN