Installation Precautions - Triangle AIO TWIN Mode D'emploi

EN
UNPACKING
Open the box and take out the speakers.
If you notice any defects in one of the elements as you unpack, please get in touch with your reseller.
Your speaker is fragile and it is recommended to handle it carefully. Before disposing of the
packaging, make sure there is nothing left inside.
EACH BOX CONTAINS
Î 1 x active loudspeaker AIO TWIN* (A)
Î 1 x passive loudspeaker AIO TWIN* (B)
Î 2 x magnetic grill*
Î 1 x power cable
Î 1 x 3 meters speaker cable to link the loudspeakers
Î 1 x remote control + Battery (ref: CR2032)
Î 1 x user manual
* For optimal use and perfect sound reproduction, it is recommended to remove the magnetic grill
during listening.
A B
CR2032
30

INSTALLATION PRECAUTIONS

Before the installation
Before connecting your AIO TWIN speakers, check the stability of the surface you want to install
them on. Be sure to always set the active speaker switch to OFF before removing or plugging
connection cables. Do not plug in the power cord before all connections are made.
Moving the device
Always remove the power cord and disconnect the cables between all audio components when
moving the device. This will prevent a short-circuit or the damage to the plugs or connection cables.
Locations to avoid
Avoid humid locations or direct sunlight. It is preferable to install your speaker in a temperate place.
Recycling
Protection of the environment: your products contain valuable materials which can be recovered or
recycled. Take them to the appropriate collection points.
31
EN