Connecting A Subwoofer - Triangle AIO TWIN Mode D'emploi

EN
Connection via a 1/8-inch (3.5mm) Mini-Jack cable
A 1/8-inch (3.5mm) jack cable (included) enables you to connect your speakers to many devices:
smartphone, audio player, tablet, computer, television...
To do so:
• Plug one end of the jack connector into the "ANALOG IN / AUX" terminal and the opposite end
into your device.
• Slide the power switch on the back to the ON position to activate your AIO TWIN speakers, or
use the remote if your product was in Standby.
• Wait until the end of the start-up sequence indicated by 3 music notes and the white LED glowing
solid white, before taking any action.
• Select the "AUX" input using the remote or the "INPUT" button (volume button) on the back
of the active speaker (the order in which the sources need to be selected is indicated above
the"INPUT" button) or directly via the mobile app. The yellow LED indicates that your AIO TWIN
is connected to the "AUX" input. Your system is ready to operate.
Connection via an optical cable
The optical input enables you to connect your speakers to any audio devices with an optical
output: audio player, DVD player, television...
To do so:
• Plug one end of the optical cable into the back of the active speaker in the "DIGITAL IN /
OPTICAL" and the opposite end into your device.
• Slide the power switch on the back to the ON position to activate your AIO TWIN speakers, or
use the remote if your product was in Standby.
• Wait until the end of the start-up sequence indicated by 3 music notes and the white LED glowing
solid white, before taking any action.
• Select the "OPTICAL" input using the remote or the "INPUT" button (volume button) on the
back of the active speaker (the order in which the sources need to be selected is indicated above
the "INPUT" button) or directly via the mobile app. The purple LED indicates that your AIO TWIN
is connected to the "OPTICAL" input. Your system is ready to operate.
46
Connecting a USB drive
The USB input allows you to connect your USB storage devices, USB drive or portable hard drive.
To do so:
• Connect the storage device to the back of the active speaker in the "DIGITAL IN / USB".
• Slide the power switch on the back to the ON position to activate your AIO TWIN speakers, or
use the remote if your product was in Standby.
• Wait until the end of the start-up sequence indicated by 3 music notes and the white LED glowing
solid white, before taking any action.
• Select the"Wi-Fi" input using the remote or the "INPUT" button (volume button) on the back
of the active speaker (the order in which the sources need to be selected is indicated above the
"INPUT" button) or directly via the mobile app. The white LED indicates that your AIO TWIN is
connected to the "USB" input. Your system is ready to operate.
• Using the TRIANGLE AIO app, select the tracks you want to listen to on your AIO TWIN speakers.
(see page 42)
• Important: You can also use the USB plug to charge devices like your smartphone, portable audio
player...

Connecting a subwoofer

The AIO TWIN speakers include a subwoofer output allowing the connection of a subwoofer.
A RCA to 2 RCA cable (Y cable) must connect the SUB output of the AIO TWIN to the 2 LINE IN
of the subwoofer. Set the subwoofer volume and cut-off frequency (Crossover) so that you get a
proper sound coherence between the AIO TWIN and the subwoofer. Subwoofer sound needs to
be heard without being too powerful.
47
EN