Wired Connection - Triangle AIO TWIN Mode D'emploi

EN
CONNECTION VIA BLUETOOTH
Thanks to the latest Bluetooth 5.0 aptX technology, enjoy the music with a sound quality close to
CD. The range is approximately 10 meters, according to the environment and the obstacles met.
The AIO TWIN speakers let you play music from any Bluetooth-enabled sources: smartphone,
tablet, computer...
To do so:
• Slide the power switch on the back to the ON position to activate your AIO TWIN speakers, or
use the remote if your product was in Standby.
• Wait until the end of the start-up sequence indicated by 3 music notes and the white LED glowing
solid white, before taking any action.
• Select the "Bluetooth" input using the "INPUT" button on the back of the speaker, the remote
or the TRIANGLE AIO app. The blue LED indicates that the AIO is connected via "Bluetooth".
• When the LED is blinking blue, it indicates that the system is seeking to connect to a Bluetooth-
enabled device (smartphone, tablet...).
• When you search on your Bluetooth source (refer to the source's user manual if needed), the
speakers should appear under the name "TRIANGLE AIO TWIN", you can then connect to them.
Your speakers are now linked to your Bluetooth source. The connection will be done automatically
next time you switch ON your speakers if Bluetooth is selected and enabled on your device.
• If you want to connect another Bluetooth source while the previous one is still connected, turn off
the Bluetooth of the first source. The LED will blink again to indicate the Bluetooth is available.
• Using the remote of your AIO TWIN, you can change tracks, play or pause them without going
through your Bluetooth source.
• The AIO TWIN volume is independant of the Bluetooth source volume.
44

WIRED CONNECTION

Connection via an RCA cable
line
The RCA input enables you to connect your speakers to your television, CD player, turntable or
other devices.
To do so:
• Plug the red and white connectors into "RCA INPUT" on the back of the active speaker, following
the colours and do the same on the source.
• Check that the PHONO/LINE selector is on "LINE".
• Slide the power switch on the back to the ON position to activate your AIO TWIN speakers, or
use the remote if your product was in Standby.
• Wait until the end of the start-up sequence indicated by 3 music notes and the white LED glowing
solid white, before taking any action.
• Select the "RCA" input using the remote or the "INPUT" button (volume button) on the back
of the active speaker (the order in which the sources need to be selected is indicated above the
"INPUT" button) or directly via the mobile app. The green LED indicates that your AIO TWIN is
connected to the "RCA" input. Your system is ready to operate.
Connecting a turntable
If you connect a turntable (without a built-in phono preamplifier), place the "PHONO/LINE"
selector on PHONO to activate the phono preamplifier MM, built into your AIO TWIN speaker.
Connect the ground cable connector to the designated terminal on the back of your active speaker
and on your turntable.
phono
ou
45
EN
FR