OPERATING yOUR BREvILLE MILK CAFé™
NOTE
The milk frother has been designed
specifically for the purpose of
foaming milk and other dairy milk
alternatives and is not intended to
whip, thicken or heat other food
substances eg. oil, eggs, butter, heavy
whipping cream, soups, gravies etc.
The milk frother is not designed
to mix a large quantity of dry
ingredients or melt large food pieces
eg. cubed chocolate, ground nuts,
whole spices, fresh herbs or ice cubes.
ADDING INGREDIENTS
Always allow the milk frother to start for
a few seconds before using the measuring
cap to gradually add ingredients. If using
one of the heated settings, this will allow
the milk to warm up and help dissolve the
additional ingredients.
Always add ingredients slowly and in small
quantities. Adding ingredients too quickly
can cause the frothing disc to dislodge or
stop spinning.
14
NOTE
Frothing results differ depending on
the ingredients used.
Experiment with different milk
options, ingredients and frothing
discs to achieve the desired result.
SAFETy FEATURES
Standby
After 30 seconds of non-use, the milk
frother will enter standby mode. The
button surround will cease to illuminate.
To reactivate the milk frother out of standby
mode, turn or press the START | STOP
push-dial.
Boil Dry, Overheating Protection
The milk frother will automatically cease to
operate if the milk jug overheats. This can
be caused if the milk jug is empty, if liquid
is below the MIN measurement marking,
or after consecutive uses. If this occurs,
3 alerts will sound. Wait approximately
5 minutes for the milk frother to cool down
or fill the milk jug with water for faster
cooling. Once adequately cooled, you will
be able to reactive the milk frother and
recommence frothing.
Thermal Fuse & Current Protection
This feature protects the milk frother in
case of major fault. If this occurs, the milk
frother will automatically turn off and will not
reactivate. Immediately cease use, remove the
power plug from the power outlet and visit
www.Breville.com or call Breville Customer
Service at 1-866-BREVILLE for examination,
repair or adjustment.