Registering/Connecting The Receiver And Transmitter With Each Other - switel BCF900 Mode D'emploi

Registering/Connecting the receiver and transmitter with each
other

4 Registering/Connecting the receiver and transmitter with each other

The receiver and transmitter are already registered when supplied.
If necessary, registration can also be completed manually:
3. Press and hold the Channel
button (10) on the rear side of the
receiver and Mode button (4)
simultaneously.
4. A menu appears on the LC display
in which you can navigate vertically
using the Channel button (10) and
horizontally with the (+/-)
buttons (6). Use the Channel
button (10) to select a channel, e.g.
CH 1, and the (+/-) buttons (6) to
select "Pair".
5. Confirm your selection by pressing the Mode button (4). "Pairing" appears in the LC display.
6. Press the Code button on the rear side of the transmitter. The Power LED on the transmitter
flashes.
7. Pairing succeed and the selected channel appear in the display.
8. Confirm by pressing the Channel button (10). The camera image reappears.
If you have several transmitters available, you must use the menu to select the different chan-
nels (CH1 - CH4) individually and press the Code button for each transmitter. The receiver
supports up to four transmitters.
54
All manuals and user guides at all-guides.com
Receiver
Transmitter, rear side
(open)
4
6
Code
10
16