Items Supplied; Technical Data; Charging The Battery - Hilti BX 3-ME Mode D'emploi Original

3.8 Items supplied

BX 3-ME or BX 3-IF fastening tool, operating instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.com

4 Technical data

4.1 Fastening tool
Weight
Nail length (collated nails)
Nail length (single nails)
Nail diameter
Magazine capacity
Compression stroke
Contact pressure
Recommended maximum fastening rate
Rated voltage
4.2 Examples of approved fasteners for electrical, plumbing, heating and air-conditioning systems
installation applications
In conjunction with the X-FG B3-ME fastener guide the following fasteners are approved for electrical,
plumbing, heating and air-conditioning systems installation applications.
Nails for magazine mode
Nails for single-fastening mode
Threaded studs for single-fastening mode
Fastening electric cables
4.3 Examples of approved fasteners for drywall applications
In conjunction with the X-FG B3-IF fastener guide the following fasteners are approved for drywall
applications.
Nails for magazine mode
Nails for single-fastening mode
5 Preparing the tool for use

5.1 Charging the battery

1. Remove the battery. → page 10
2. Charge the battery in accordance with the information provided in the operating instructions for the
charger.
Printed: 24.08.2016 | Doc-Nr: PUB / 5269973 / 000 / 02
8.4 lb
(3.8 kg)
0.6 in ... 0.9 in
(14 mm ... 24 mm)
1.2 in ... 1.4 in
(30 mm ... 36 mm)
0.12 in
(3.0 mm)
20 nails
0.5 in
(12 mm)
11 lb ... 16 lb
f f
(50 N ... 70 N)
500/h
21.6 V
X-S 14 B3 MX | X-P 17 B3 MX | X-P 20 B3 MX | X-
P 24 B3 MX
X-P 30 B3 P7 | X-P 36 B3 P7
X-M6-7-14 B3 P7 | X-M6-7-24 B3 P7 | X-W6-12-
14 B3 P7 | X-W6-12-20 B3 P7
X-EKB MX | X-ECT MX | X-ECH MX | X-EKS MX |
XEKS C MX
X-P 17 B3 MX | X-C 20 B3 MX | X-C 24 B3 MX
X-P 30 B3 P7 | X-P 36 B3 P7
English 7