Various Speed Playback - JVC XV-NP10S Manuel D'instructions

To resume playback
When the resume mode is "ON"
While the disc you interrupted playback is
still on the disc tray, press 3 /SELECT.
The player resumes playback from the position where
playback was interrupted. The TV screen shows "RESUME
PLAY."
To play back from the beginning
Press 7 before pressing 3/SELECT to start playback.
When the resume mode is "DISC RESUME"
1
Press 0 to insert a disc for which the player
has stored an interrupted position.
The TV screen shows "RESUME STOP."
2
Press 3 /SELECT.
The TV screen shows "RESUME PLAY" and the player
resumes playback from the position where playback was
interrupted.
To play back from the beginning
After inserting the disc, press 7 before pressing 3/SELECT to
start playback.
When playing back a memory card
Pressing the DVD/CARD with a disc loaded clears the memory of
the interrupted position.
To playback a memory card without clearing the memory of the
interrupted position, do the following procedure.
1 Set the [RESUME] setting to [DISC RESUME].
2 Press 7.
3 Press 0 to eject the disc.
4 Press DVD/CARD and start the memory card playback.
NOTES
• If you change the [RESUME] setting from [DISC RESUME] to
[OFF] or [ON], you cannot resume playback of a disc whose
"resuming" position is stored. However, when you again set
[RESUME] to [DISC RESUME], you will then be able to resume
playback of the disc.
• When you resume playback, set the [RESUME] setting to [DISC
RESUME] before removing a loaded disc.
• If you interrupt the playback of a disc for which an interrupted
position has already been stored, the memory will be updated
with the new interrupted position.
• For a double-sided DVD VIDEO disc, the player regards each
side as a different disc. Therefore, to resume playback of such a
disc, the disc must be inserted with the same side down.
• When the player memorizes an interrupted point for a disc, it
also memorizes Audio, Subtitle and Angle settings.

Various speed playback

To advance or reverse playback rapidly
while monitoring
During playback, press ¡ or 1 on the
remote control unit.
You can select from 2 times (1.5 times for only the forward
playback of DVD VIDEO), 5 times, 20 times and 60 times (for
DVD VIDEO only) normal speed. Pressing 3/SELECT
returns the player to normal playback.
During playback, hold down ¢ or 4 .
Playback is advanced or reversed at 5 times normal speed.
NOTE
During rapid playback, the sound will be muted except when
playing an audio CD, and when playing a DVD VIDEO at 1.5
times normal speed. For Audio CD, the sound will be heard
intermittently.
x1.5 Quick Playback with sound
When you select 1.5 times normal speed playback, the disc is
played back with sound.
• The subtitle does not go off.
• The sound may be heard intermittently.
• If the sound of a DVD VIDEO disc is recorded in Dolby Digital or
DTS format, stereo linear PCM signals are output. With some
DVD VIDEO discs, the sound quality and volume may alter, or
the sound may be out of tune.
• To switch from rapid reverse playback to x1.5 Quick Playback,
first press 3/SELECT, then press ¡ once.
To advance a still picture frame by frame
While paused, press 8 .
Each time you press 8, the still picture advances to the next
frame.
Pressing 3/SELECT returns to normal playback.
To play back in slow motion
You can select from 1/32 times, 1/16 times, 1/4 times and 1/2
times normal speed.
During playback, press 8 , then press ¡ (to
play forward slow motion), or 1 (to play
reverse slow motion, for DVD VIDEO disc
only).
Pressing 3/SELECT returns to normal playback.
NOTE
During slow motion playback, the sound will be muted.
Basic operations
13